General knowledge about Jutai masks


1. Water repellent layer (outermost layer): This layer is used to block droplets, water droplets, dust and blood.

2. Filter layer (middle layer): This layer is related to the efficiency of bacterial filtration.

3. Skin-friendly layer (the innermost layer): This layer is in contact with the human body and is related to the comfort when wearing.

Jutai Water Repellent Layer-Plain Surface
The non-woven fabric used in the material is not chemically dyed, but the thermoplastic resin material colorant of "color masterbatch", and the PP plastic pellets are melted and sprayed into a colored non-woven fabric through high temperature and high pressure, and then processed into a mask. After chemical dyeing, there will be no problems with AZO dyes (azo dyes).

Jutai Water Repellent Layer-Printed Fabric
The outer layer of the printing does not contain azo dyes. We use environmentally friendly pigments. The ink has SGS certificate and test report, MSDS inspection and test report.

Jutai filter layer
The test rate of medical masks produced by the meltblown non-woven fabric developed and produced by Jutai is up to the domestic CNS14774 standard and the American ASTM F2100 standard (PFE95%, BFE99%, pressure difference within 3)

Jutai skin-friendly layer
The ES fiber non-woven fabric used is a higher grade, and it is non-dyeing. Because the inner layer of the mask touches the skin and mouth, sensitive people will be allergic, so the ES fiber non-woven fabric we use has been tested and is non-toxic. Safe materials, which is why we insist on covering the skin-friendly layer to the surface in the process of making masks.

P.S. The relevant test report of our company is on the company website-test report

*Intimate reminder: Masks are consumables, remember to replace them, it is recommended not to reuse them*